MenuMenu

News archive

  • Quick response manufacturing

    Nooteboom Components – Quick Response Manufacturing

    May 2019

    Nooteboom Components is the name for the fully automated department at Nooteboom Trailers where components for trailers are produced. One of the existing production halls has been completely renewed inside. Ultramodern machinery for manufacturing vehicle components were installed In this hall, including a laser cutting machine, two new press brakes, a milling machine and a welding robot. Nooteboom Components works according to the ‘Quick Response Manufacturing’ method. This QMR-method is primarily aimed at reducing lead times in the production. But it also has a positive influence on the efficiency of the components’ production.
    Read more

  • Liebherr Windmill

    Wind energy without subsidy – background story

    April 2019

    End 1980 the first commercial wind project sprang up on the hillsides of Crotched Mountain in Southwest New Hampshire (USA): twenty windmills with a total capacity of 0.6 MW. The interest for wind energy blew over from the United States to Europe and in the nineties the number of windmills increased dramatically. Nooteboom keeps a close eye on the world of wind energy through own research. Wind energy is now used worldwide. Interesting emerging markets are Russia, Argentina, Saudi-Arabia and Vietnam. Lengthy procedures and stringent regulations restrict the growth in Europe. Everyone wants to back the switch to clean energy, but no one likes to see a windmill in their back yard. Via political decisions about the levels of subsidies, the government decides the pace at which we can switch to wind energy.
    Read more

  • Nooteboom stand BAUMA

    Nooteboom innovations at BAUMA 2019

    March 2019

    The Bauma, the largest trade fair in the world, is getting even bigger. For Nooteboom an ideal opportunity to present their latest developments for international abnormal transport and the latest trends for the construction industry. The Nooteboom stand, number FN 721/10, is on the huge outdoor area.
    Read more

  • Hegmann Manoovr

    Mega investment in Nooteboom special trailers by Hegmann Transit

    March 2019

    Hegmann Transit GmbH & Co. KG from Sonsbeck in Germany, partner of the Bigmove group, has extended their fleet with a large number of Nooteboom low-loaders and Manoovr semi low-loaders. Hegmann already has dozens of Nooteboom trailers. These latest additions are specifically intended to be used for the transport of heavy machinery.
    Read more

  • Nooteboom Mega Windmill Transporter

    Nooteboom granted a patent for the Lift Adaptors of the Mega Windmill Transporter

    February 2019

    At the end of last year Nooteboom has been granted the European patent (Number EP1558464) for the LIFTAD, the special lift adaptors for the Mega Windmill Transporter.
    Read more

  • IPAF

    Factory visit IPAF at Nooteboom

    February 2019

    The Dutch and Belgium members of the IPAF (The International Powered Access Federation) where guest at the Nooteboom factory in Wijchen last week. The IPAF promotes the safe and effective use of powered access equipment worldwide. It was a very interesting program which started early in the morning and ended at 17.00. Besides the IPAF program, Nooteboom held several presentations and trailer demonstrations as well as a guided factory tour.
    Read more

  • Novab-ipad-truck-jenniskens

    Nooteboom introduces NOVAB 3.0 Axle load calculation

    December 2018

    Meanwhile Nooteboom has developed the latest generation NoVAB: Nooteboom 3.0 Cloud version. This latest NoVAB offers important improvements and advantages. Selecting the right tractor-trailer and calculating how the weight of the load is distributed over the various axles is now even quicker and easier. You can also specify whether one or several axles are to be lifted. With the push of a button the optimal load position, to prevent exceeding the maximum axle load, will be calculated. This will tell you in advance whether the complete combination with its load complies with the maximum axle loads that are permitted within a specific country.
    Read more

  • BSP_NOOTEBOOMCURSUS_ (4 van 21)

    Nooteboom Academy® starts cooperation with V-TAS training for courses Code95 and Driver Abnormal Transport

    December 2018

    V-TAS training centre in Bladel and Nooteboom Trailers are starting an exclusive cooperation for specific training and courses aimed at abnormal road transport. The focus is on Code95 and Driver Abnormal Transport training. The teaching programs have been put together in cooperation with V-TAS, which resulted in a comprehensive package of targeted training for abnormal transport.
    Read more

  • IAA 2018

    Visit Nooteboom at IAA (Hannover-DE) from 20-27 September

    September 2018

    We would like to invite you to visit us at the IAA exhibition in Hannover from 20 - 27 September. At...
    Read more

  • The Heavies – Nooteboom Innovation Award 2018

    Nooteboom receives Heavies Award for ‘Innovation of the Year’

    September 2018

    In the category Trailer Medium Weight (3-5 axles) Nooteboom has been elected by the judging panel as the winner of the Innovation of the Year Award for the Manoovr semi-lowloader with excavator trough and 80 tonne heavy duty ramps. Again, there was one stand-out entry in this category. It was developed in response to the need for a more efficient way to transport big construction machinery In the words of one of the Judges: ‘The next stage in the Manoovr range. A super strong trailer that’s ideal for heavy plant.’
    Read more