MANOOVR MPL SEMI LOW-LOADER with hydraulic steering and pendle axles

Advantages MANOOVR MPL

The advantages of the MANOOVR MPL semi low-loader compared with a conventional semi low-loader include:

• High axle load of 12 t/axle line throughout Europe, resulting in a very high payload
• Ultra-low loaded floor height of just 780mm in the lowest position
• Unprecedented manoeuvrability due to the large steering angle of 60 degrees on the rear axles and 70 degrees on the front axles of the Multidolly
• Long suspension stroke of 500mm, making it easy to negotiate obstacles on the road and allowing to load jacked-up loads without the use of a crane
• Large ground clearance under the central beam and between the axles
• No vulnerable components underneath the chassis
• The chosen drive height or a bumpy road will not affect the track width and alignment, which significantly increases the tyre life
• For optimal steering performance and a long life of the tyres the steering can quickly and easily be adjusted to the extended length
• Very few pivot points in the steering and suspension, which keeps maintenance and wear to a minimum
• Outstanding loading capacity of the load floor, comparable to modular trailers, even with a low dead weight
• Very easy to operate by centrally located controls underneath the gooseneck
• Quick and easy change of inside wheel
• Hose rupture safety valve on every pendle axle as standard

The MANOOVR MPL semi low-loader is available with, among other things:

• 3 to 10 axle lines with hydraulic steering
• Manual steering with remote control
• Gooseneck fixed or hydraulically adjustable
• Fixed or single/double/triple extendible load floor
• Pendle axles with hydropneumatic suspension including raise/lower function
• Loaded load floor height in lowest position 780mm
• Tyres 245/70R17.5
• Technical axle load of 12t/axle at 80 km/h
• SAF axles or BPW axles
• Axle distance 1360mm or 1510mm
• Load floor width 2520mm or 2740mm
• A wide range of ramps for different applications – with a low angle of inclination and seamless connection to the load floor.

The MANOOVR MPL semi low-loader is equipped as standard with TÜV-certified lashing eyes, stake pockets and manual steering. For extra load capacity and optimal weight distribution the MANOOVR MPL semi low-loader can be extended at the front with a Multidolly.